Subscribe Now Auto-Delivery Subscription We'll send you a reminder email before your credit card is charged for any recurring subscription orders. Print Specs. Schedule Service Our online tools are here 24 hours a day to help you arrange the service you need. Schedule Service. By Phone. You May Also Like. Please see page 55 for installation recommendations for the remote thermostat wiring. Compatibility of other thermostats considered for use with GE Zoneline units is the responsibility of the customer.
The control voltage on the remote control conductors is 24 volts AC. The AC voltage may not be compatible with some solid-state thermostats. The fan speed for the Series in remote thermostat operation is selected by the connection of the fan wire from the thermostat to either the HIGH or LOW terminal on the unit. Operating the unit in low fan speed reduces the operating sound level of the unit. See page 14 for additional information on the CDC system.
Unit temperature limiting settings are not functional when unit is connected to a remote thermostat. GE offers two thermostats compatible with the. Compatibility of other thermostats considered for use with the GE Zoneline unit is the responsibility of the customer.
When connected to a remote thermostat, the indoor-air- temperature sensing is shifted from the unit to the remote thermostat.
For this reason, the units will operate slightly differently when connected to a remote thermostat. The above chart shows the unit operation when connected to a remote thermostat.
Unplug the unit or disconnect power and remove the room cover. Plug the unit back in or reconnect power. Press the Aux Set button once.
The letters AU will appear in the display. Press the up arrow once so the top half of the right hand digit is lit. Press the Aux Set button to exit the setup function. The units employ a logic system monitoring both outdoor and indoor temperatures to determine the heat source, thus increasing energy savings by operating longer in the heat pump mode.
Heat pumps save energy and cost less to operate than units with electric resistance heaters as the only heat source. Just as the EER of an air conditioner is an indication of the efficiency of the unit, COP Coefficient of Performance is the indication of the efficiency of the heat pump. This relative efficiency of a heat pump compares the unit to electric resistance heat. If a unit has a COP of 3.
The compressor is used in heat pump operation just as in air conditioning operation. In heat pump operation, the hot refrigerant gas is directed to the indoor coil rather than to the outdoor coil. Room air that circulates over the. As the outdoor temperature falls, the heat pump is able to extract less heat from the outdoor air to raise the temperature of the indoor air.
For this reason, all packaged terminal heat pumps also have electric resistance heaters as backup to heat pump operation. At some point, the heat pump is unable to provide sufficient heat to adequately warm the room. Many Packaged Terminal Heat Pumps cease heat pump operation and change to more expensive resistance heat at some pre-determined outdoor temperature to compensate for. Virtually every room is unique—with different insulation, different sizes and types of windows, different types of construction, different directional exposures.
All these variables, as well. For these reasons a consulting engineer should be engaged to calculate the heat loss and specify the heat pump unit required. GE offers the series of Zoneline heat pump units—with highly featured microprocessor controls—react to the indoor temperature as well as the outdoor temperature in determining the heat source to provide comfortable room. This determination of the heat source based on the indoor temperature helps provide a more comfortable room.
Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. GE User Manual Download for 1.
Cross flow blower across the product line for quieter operation. For that reason, we again strongly recommend that a professional engineer determine proper application. GE Zoneline PTACs and PTHPs are self-contained units designed for through-the-wall installations in hotels, motels, apartments, hospitals, nursing homes, add-on rooms and many other installations. Use of components not specifically designed or approved for use with the Zoneline unit can result in unsatisfactory operation and can be the cause of failure not covered by the warranty.
Weather-Protected Electrical Components Vital electrical components are protected from the weather by locating them on the indoor side of the weather barrier. Industry specification is 19 CFM of air infiltration. Heater Sizes to Meet Room Requirements All units are equipped with a universal heater — the resistance heat output is determined by power connection kit.
Unit Controls and Series — touch pad controls with digital readout of temperature set point. Highly Featured Microprocessor Controls Microprocessor controls are programmed to interface with the temperature sensors to maximize comfort conditions for the room occupant and provide outstanding features. The resistance heat is used in the Quick Heat Recovery feature. See pages 18 and 19 for discussion of heat pump operation and defrost systems. High-Temperature Heat Pump Operation Protection Automatically protects the compressor if heat pump is operated with high outdoor temperatures.
Fan Motors — Permanently Lubricated All units have two fan motors for quiet operation and maximum operating efficiency. Outdoor Fan The unit automatically selects the most efficient speed for the outdoor fan. Eliminates need of changing fan-cycle switch seasonally. Compressor Random Restart In the event of a power failure, all compressors attempting to restart immediately when power is restored can result in a power surge that can cause another power interruption.
Rotary Compressor Smoother operation for quiet, dependable service. Compressor Restart Delay Zoneline units are designed to provide a minimum of three minutes of compressor off time to allow refrigerant pressures to equalize before restarting to prevent compressor damage. Freeze Sentinel may be turned off by dip switch on auxiliary control. Heat Sentinel The property owner may choose to activate the Heat Sentinel feature on the Zoneline unit.
Indoor Coil Frost Control Prevents indoor coil from freezing and causing complaints due to lack of cooling. The unit automatically shuts the compressor off until the indoor coil temperature warms to the point where frosting will no longer occur. Transfer Fan Interface 24 VAC terminals are provided to operate a relay to control a fan mounted in a wall to move conditioned air into another space.
Electronic Temperature Limiting Seven independent programmable heating temperature limits and seven independent programmable cooling temperature limits.
Heating Temperature Limits Highest Heat 65 70 72 74 76 78 80 85 Lowest Cooling Temperature Limits Cool 60 64 66 68 70 72 74 76 Limits are set via the auxiliary control setting push button. Central Desk Control Capability See page Energy Management System Interface with Load-Shedding Option All units have a switch via the auxiliary control setting to allow the indoor fan to continue operating if the unit is connected to an energy management system that shuts off compressor or heater operation.
Features and Benefits Up-Front Air Filters Two interchangeable up-front filters, easy to remove and reinstall, may be cleaned without opening or removing the room front.
Corrosion protection is standard on the Dry Air 25 models. Enhanced Dehumidification Moisture removal is an important function of an air conditioner. Locking Door Kit RAK — A door with a lock that replaces the standard control cover door to prevent unauthorized changing of control setting is offered as an accessory.
Auxiliary Control—Aux Set Button The auxiliary control push button is located behind the room cabinet, below the control panel. Central Desk Control Some installations may want to govern the ability of the unit to operate from a control device remote to the unit or even remote to the room in which the unit is located. The devices connected to the Zoneline units require no power supply or transformers external to the unit.
Important CDC Comments all series applicable 1. A unit mounted high in the wall or over a door, for instance, where the unit-mounted controls are inaccessible, can be connected to a wall-mounted thermostat. Resistance Heat Models The Zoneline resistance heat units may be connected to a single-stage thermostat designed for use with cooling with electric heat systems. Om ecfions provide 24 v ac to energize a remote relay, tm'ning on the external tim. Online cell phone repair. Az58h07eadm1 ge zoneline air condtioner heat pump.
Heaven fresh hf 20 air purifier for kitchen and small areas - color pearl white. At the top of the list is the service you can expect from our dealers. We handle horizontal, vertical, and console units up to btu. Ge zoneline ptacs and pthps are self-contained units designed for through-the-wall installations in hotels, motels, apartments, hospitals, nursing homes, add-on rooms and many other installations.
American standard accuclean whole-home air filtration systems can remove up to Send us an e-mail, request a chat session, or call us on the phone for friendly customer support and assistance.
Package terminal air conditioner ptac and heat pump. We have oem replacements for all mcquay ptacs, with the exception of the type j unit, which has been discontinued by mcquay.
Trane ductless air conditioning and heating solutions offer a comprehensive range of hvac applications. A heat pump cools in the summer and than reverses to heat during the winter. Find non-standard ptac units for remington, singer, adirondack, mcquay, american air, nesbitt. Ge s wb02x microwave charcoal filter is designed to replace soiled filers on most general electric model microwaves beginning with jvm20, whether one is reheating chicken or making popcorn, preparing foods in the microwave often generates a great deal of grease, as well as odors.
0コメント