In the given article, we shall look at multiple solutions to solve the issue of CD-Drive not working. For the ones using Windows 7 or earlier variants, when the CD or DVD drive is not seen in the File Explorer, there is a yellow exclamation point along which the device is marked within the Device Manager. This is the basic method to get rid of the problem of CD-Drive not working.
Here are the steps:. This is more or less a conclusive step to eliminating the problem of CD-Drive not working. However, this solution is recommended only for the advanced users as there is a need to perform the process as an administrator.
Figure : Default Programs. Make sure Use AutoPlay for all media and devices is selected. If not, select it. Figure : AutoPlay settings. Plastic discs can be easily scratched and data on the disc can be destroyed if left in the sun.
Discs damaged by sun must be replaced. If a disc is scratched, try to clean or repair the disc. Most home electronic stores offer disc repair kits at minimal cost. If the liquid from the repair kit has not dried thoroughly, the liquid may come off of the disc when the disc spins up.
This can damage the optics inside the drive and make matters much worse. Use the following steps to help determine if discs or the drive need further attention:. If an AutoPlay window opens, the drive is able to read the disc. The data stored on the disc may still be bad, but an AutoPlay window proves that the drive can read data on the disc. If nothing happens or the computer stops responding, the laser is unable to read the initial startup information on the disc.
Press the eject button to retrieve the disc and unlock the computer. Try more software CDs to get an idea for how the drive is functioning. Insert at least three more software discs in the same manner. Use discs that are in good condition and are known to work in other drives. Note what happens. If any discs fail to open, set the failed discs aside. If all discs pass, the drive can read the startup data on the discs and the drive is good.
Bad data, scratches, or smudges on discs is preventing the drive from reading the data. Repair or replace the bad discs. Use discs from different manufacturers and recording labels. This can help determine if the drive has a problem reading certain types of disc formats. Once you have tested several types of discs, try using the failed discs in another drive in another computer to see if they can be read.
If the discs fail in another drive on another computer, the discs are probably bad. If the discs can be read in the other computer, continue using these steps to troubleshoot the drive. Confirm that the drive can read discs from a command prompt. So it is not unusual for 1 or 2 parts to not function while the others do so properly.
Did you complete the troubleshooter for the drive that still does not work? There are some registry entries that the troubleshooter does not fix and those 'might' be the cause. Check with your System Maker and Device maker for both possible firmware updates and the correct Registry entries for your drive.
Be sure to ask for specific keys involved as well as the settings. OR Option 2 Recommended : Update drivers automatically - Even computer newbies can update drivers with just a few clicks of a mouse.
Dvd Cd Rom Driver Windows 10 Stage 1 : Please do all the below even if you have done some before as it is often the total process which solves the issue. If you have recently installed or moved your computer, verify that the CD-ROM cables are connected correctly. If the disc drive is not opening when you press the eject button, verify the CD-ROM power cable is firmly connected.
If you tried all the steps above and you're still encountering errors with reading discs in the CD-ROM drive, the drive is bad. Note If the disc drive is not opening when you press the eject button, verify the CD-ROM power cable is firmly connected.
0コメント